Draper Foundation Pros logoDraper Foundation ProsFoundation Repair · Draper, UT
Menu
sidewalk lifting in Draper, UT

Draper Foundation Pros

Sidewalk Lifting in Draper, UT

Sidewalk Lifting in Draper, UT: polyjacking lifts trip-hazard panels flush in hours, free estimates, no mudjacking mess.

Serving Draper and nearby communities.

A sidewalk panel that's an inch or two proud of its neighbor isn't just an eyesore, it's a trip hazard waiting for an HOA notice or worse. On Draper's bench lots, backfill soil around walkways settles unevenly after spring runoff, and freeze-thaw cycles keep nudging panels out of alignment year after year. Draper Foundation Pros lifts those slabs back to grade with polyjacking instead of tearing out and repouring concrete you'd otherwise have to wait days to cure.

What's included

What's included with Sidewalk Lifting

Typically included: panel-by-panel trip hazard assessment, drilling, hydrophobic foam injection, and hole patching to match the surrounding surface. Optional: joint resealing along the full walkway run if multiple panels are out of alignment. Customer prep: clear the walkway of planters, furniture, or stored items before the crew arrives.

How it works

How our Sidewalk Lifting process works

  1. Sidewalk Inspection photo
    Step 1

    Sidewalk Inspection

    Trip hazards and uneven slabs are identified along the walkway.

  2. Access Hole Drilling photo
    Step 2

    Access Hole Drilling

    Small entry points are drilled into the affected slab sections.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Material is injected to raise the sidewalk to a safe level.

  4. Height Matching photo
    Step 4

    Height Matching

    Adjacent slabs are aligned to eliminate tripping hazards.

  5. Hole Patching photo
    Step 5

    Hole Patching

    Access points are sealed to restore a smooth surface.

  6. Final Safety Check photo
    Step 6

    Final Safety Check

    The sidewalk is reviewed to confirm proper alignment and safety.

Materials

Materials and methods for Sidewalk Lifting

  • Polyurethane Foam photo

    Polyurethane Foam

    Raises sidewalk slabs quickly with minimal curing time, important on bench lots where soil keeps shifting after snowmelt.

  • Patch Mix photo

    Patch Mix

    Fills access holes to restore a flush surface finish that holds up through freeze-thaw winters.

  • Joint Sealant photo

    Joint Sealant

    Reseals joints between slabs after lifting is complete, keeping meltwater from re-softening the base.

  • Surface Protectant photo

    Surface Protectant

    Helps guard repaired areas from weather exposure common along the Wasatch Front.

  • Alignment Gauge photo

    Alignment Gauge

    Used to measure slab height differences during the process so every panel sits flush.

  • Bonding Primer photo

    Bonding Primer

    Improves patch material adhesion to original concrete so the repair doesn't chip loose.

Timeline

How long does sidewalk lifting take?

  1. 01

    Stage 1

    Most sidewalk jobs are a single visit, start to finish, with the crew moving panel to panel in order.

  2. 02

    Site assessment

    same day
  3. 03

    Foam injection and lift

    1–2 hours

    per affected panel.

  4. 04

    Walkable again

    within an hour of the final patch.

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and after Sidewalk Lifting

  • sidewalk lifting in Draper, UT
    Before
  • sidewalk lifting in Draper, UT
    After

FAQs

Sidewalk Lifting FAQs

Do I need a permit to lift a sunken sidewalk in Draper?

Private walkways on your own property usually don't need a permit. If the sidewalk sits in the public right-of-way, it can fall under city or county review, and which office applies depends on whether your home is on the Salt Lake County or Utah County side of Draper.

How much does sidewalk lifting cost?

Pricing is based on panel count and how far out of level each one is, generally landing well below a full tear-out and repour.

Is polyjacking better than mudjacking for a sidewalk?

Yes. Hydrophobic polyurethane foam weighs a fraction of mud slurry, cures in minutes, and won't oversaturate the soil underneath like a mud mix can.

Can I patch a trip hazard myself?

A asphalt ramp or shim patch over the edge is a temporary fix at best and usually doesn't meet code. It leaves the underlying void unaddressed, so the panel keeps settling.

Will the repaired sidewalk match the rest of the walkway?

Patched holes are finished to blend with the surrounding concrete, though slight color variation is normal until weathering evens it out.

How soon can I use the sidewalk after lifting?

Most panels are walkable within an hour since the foam reaches working strength quickly.

Next step

Get a Sidewalk Lifting estimate in Draper

Trip hazard at your front walk or along a side path? Call (435) 681-2842 or request a free estimate and we'll get a panel-by-panel price before any drilling starts.

Ask about Sidewalk Lifting

Tell us about the project and how to reach you.

Call (435) 681-2842